Support Snugr Snugr Helpdesk & FAQ Base de Connaissance EN
EasyPelt connected valves
Articles suggérés dans la Base de Connaissance:

Base de Connaissance EN EasyPelt connected valves

Articles dans cette Catégorie :

How do I move an EasyPelt valve to another room?

In Snugr, each valve is linked to a specific room.If a valve is physically moved without updating the associated room in Snugr, the heating regulation will be disrupted (incorrect temperatures and sch...

Are Snugr EasyPelt valves compatible with my radiator?

Snugr EasyPelt valves are compatible with the vast majority of radiators available on the market. To install a Snugr EasyPelt valve, your radiator must be fitted with a thermostatic valve body, meanin...

How do I start the valve calibration / initialization procedure?

The procedure depends on the valve model. Follow the section that matches your device. EasyPelt v1.2 (batteryless) Press and hold the button for 10 seconds: the red LED turns on and then off. Releas...

How do I pair an EasyPelt valve with my Snugr installation?

For Snugr to regulate heating correctly, each valve must be paired with your installation and assigned to the correct room. Basic steps (installation wizard) Open the Snugr interface (local or remot...

My valve shows the “low batteries” symbol. What should I do? How do I replace the batteries?

When your valve shows the “low batteries” symbol, it’s time to: replace the batteries (for battery-powered valves), or recharge the valve (for rechargeable EasyPelt valves). Follow the section t...

My valve shows the “red hourglass” icon (communication timeout). What should I do?

The red hourglass icon indicates a communication timeout: the valve has not received messages from the Snugr gateway for too long. How does communication work? Valves communicate with the Snugr gatewa...

My valve shows the “mechanical error” symbol (red spanner): what should I do?

The red spanner icon indicates a mechanical error: the valve cannot correctly actuate the valve pin on the thermostatic valve body (stuck pin, insufficient stroke, abnormal resistance, etc.). 1) Remo...

My radiator is heating even though my valve is closed: what should I do?

On EasyPelt valves, an alert may appear when the valve detects too much heat input while it has been closed for a certain period of time. This alert disappears: when the valve opens, or when the v...

My radiator is not heating: what should I do?

Snugr regulates temperature using an advanced algorithm.If a small flame icon is shown for a room/zone, it means that at least one valve in that room is partially open (there is a heating demand). If ...

The temperature measured by my valve is incorrect: what should I do?

Snugr measures temperature using the built-in sensors in the valves installed in your rooms.If multiple valves are installed in the same room, the displayed room temperature is the average of all valv...